Specially developed to effectively remove oil finishes on all exterior wood, composite or concrete surfaces using New Clean Strip Technology. Pro-Tech Stripper leaves little or no residue, will not raise grain and provides double the coverage of average strippers. Pro-Tech Stripper is the first step in preparing your wood for a beautiful Penofin application.
Surface Preparation: Use Penofin Pro-Tech stripper at temperatures when wood is not hot to the touch. To remove any debris, sweep or use a power blower. Protect bordering metal and glass surfaces and tape off any areas not being stripped. Dampen surrounding vegetation with water.
Application: Shake product well before using. Do not thin or blend with other products. Wet the surface to be stripped. Apply a generous coat with a brush, roller or garden sprayer. Penofin Pro-Tech Stripper will soften and or dissolve most coatings in 15 – 30 minutes. Keep the wood surface wet by occasional misting. Scrub the surface with a nonmetallic bristle brush or long-handled push broom. Rinse thoroughly with water using a garden hose with a spray attachment (pressure washing is not recommended). To achieve best results for perfect preparation for Penofin wood finish, follow-up with Penofin Pro-Tech Cleaner (Step #2) followed by Penofin Pro-Tech Brightener (Step #3).
ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION AND SOLID SHOES WHEN APPLYING. TEST ON A SMALL AREA TO ENSURE THE DESIRED RESULTS. CAUTION: SURFACE WILL BE SLIPPERY. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE.
Average gallon coverage: About 300-400 square feet depending on surface type.
Cleanup and Storage: Thoroughly rinse all equipment with water. Store any unused Penofin Pro-Tech Stripper in its original container. Do not transfer to a metal container as it will cause a chemical reaction. For disposal of unused product and empty containers, contact your local household refuse collection service.