Bostik StoneWall High Performance Non Sag Mortar 50 lbs D-65

Name: Bostik StoneWall High Performance Non Sag Mortar 50 lbs D-65
SKU: G00737STW
Price: 48.99 USD
Availability: InStock

$48.99

Durabond D-65 is for interior or exterior, commercial or
residential installations to set all types of porcelain, Saltillo,
ceramic, granite, slate, marble, limestone, and dimension
stone tiles.

View Technical Data Sheet

Local Delivery Only

This product delivers within our Local Delivery Zone only.
Enter your Zip below to check Shipping Availability!

In stock

SKU: G00737STW Categories: Flooring, Grouts & Mortar, Mortar

Description

Durabond D-65 is for interior or exterior, commercial or residential installations to set all types of porcelain, Saltillo, ceramic, granite, slate, marble, limestone, and dimension stone tiles. D-65 is formulated to prevent large bodied ceramic, porcelain and stone tiles from slipping in vertical applications. D-65 is also suitable for installing floor tiles.

Suggested Uses:
Use over properly prepared concrete; structurally sound, exterior grade plywood (interior/dry use only); cementitious backer board; D-222™ DURAGUARD; existing, wellbonded vinyl/VCT or ceramic tile; and cutback adhesive residue (dry only).

Product Benefits:
• Excellent for Large Bodied Tile and Stone in Vertical Applications
• Exceeds ALL requirements of ANSI A118.1, A118.4 and A118.11
• Excellent for Use on All Approved Floors and Walls
• For Interior and Exterior Jobs
• High Compressive Strengths for Extra Heavy Service.

Surface Preparation:
All surfaces must be clean, dry and smooth; free of voids, projections, loose materials, oil, grease, sealers, curing compounds, waxes and all other surface contaminants that may inhibit proper bond.

Directions for Use:
Read and understand data sheet completely before beginning installation. Follow applicable ANSI installation standards.

Mixing:
Using a slow speed mixer (<150 rpm), mix 6 quarts of clean, potable water to 50 lbs. D-65 Mortar. Mix to a creamy consistency. Allow the mixture to stand 15 minutes, and re-mix prior to application. Note: For installation of large bodied wall tiles the product should be mixed to a stiff but creamy consistency. Excess water or a “loose” mix may cause tiles to slip. Do not re-temper by adding more water. Mix with water only.